C. If I press the green button on the Parrot CK3100 handsfree kit to initiate a call, nothing happens. With my prior phone, I had used an app called BTGnow to assign the green Bluetooth handsfree to dial Google Now. I installed this and then tried pressing the green button. I was given a choice of what this button triggers, and picked SoundAbout.
i fitted it myself and both the switched and permanent +ve are correct i did have to swap them as per the parrot wiring instructions as audi iso has only the permanent +ve but in the wrong place i had to wire in a switched supply the only other wires i needed were the grey and green line in and the tel mute that go to the ten pin iso
4, Calls dialled through Parrot dial, but voice goes through phone. 5, Parrot reboots itself after a call. Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time.

Powering on the vehicle, parrot screen doesn't even turn on. Trying to figure things out I plugged in the old Parrot with the screen and 12v cords and now the old one doesn't turn on. I guess everything needs to be plugged in correctly before the Parrot kit even turns on. I included both Parrot manuals if that might help out (see attachments).

The Parrot box is rated to handle 25 watts RMS (assume this is per channel) so you should be fine with the Bose amp. Since have an aftermarket amp, I may have to do it differently. Parrot tech support said it should be OK, but I don't want to fry anything and I don't like the idea of sending a lot of power through the small Parrot leads.
Parrot Jumping Sumo on. Wait until the Parrot Jumping Sumo indicates that it is ready to be used and its LED eyes turn green. Press the button to switch the Parrot Jumping Sumo off. The LED eyes switch off. Downloading the application Connect to the App StoreSM or Google PlayTM and download the free FreeFlight 3 application. Connecting a
- Parrot black wire on mute harness TO PIN 15 on head unit harness - Parrot yellow wire with metal tip on mute harness TO PIN 4 on head unit harness You can now test to see if Parrot powers on and off correctly with ignition, and test to see if โ€œPHONEโ€ appears on stereo when stereo is on and you make and receive a call.
Thanks for your reply, I'll try and get one later on. In the mean time, I just don't understand. The red and orange cables with fuses are switched according to the instructions and I can't see anything else obvious. The CK3100 LCD car kit displays your mobile phone's information on an LCD screen: incoming call number, phonebook, last number called, and so on. The ingenious screen / keypad can be mounted wherever users want on the dashboard to provide the optimal viewing angle for greater comfort and useability. Make calls hands-free with the voice
4. connect the iso kit connectors to the parrot connectors - If I can remember the smaller male connectors only fit into specific smaller female sockets. I cannot quite remember what the blue wire was for but I think I left this one - this maybe for an electric aerial.
thanks for the reply , looks like I have forgotten to attach the mute wire on the multican , although it is connected on the ck3100 itself. Apparently quite a commom installation problem Fitted a Pro head unit today and connected the Mute from multican to parrot and head unit - all now works fine It was just the mute not connected via multican Jim

How to reset a Parrot MKi9000 Turn on the MKi9000 and wait about 20 seconds for the kit to fully turn on. Press the centre button on the remote and rotate until you get to โ€œSettingsโ€. Press and hold the RED and GREEN buttons on the remote control for 2 to 3 seconds.

2015 BMW F80 M3 Grigio Telesto individual. Carbon kit 2008 Porsche 997 911 Carrera 4S. Black.Factory fit Aero kit Gone: 2007 BMW E92 325i coupe Arctic Metallic Gone: 2012 BMW F20 118d sport Alpine White
This software is only compatible with Windows. We have not tested it with a Mac. Can be used to update the Parrot CK3000 Evo, CK3100, CK3300 and 3200LS Colour. Parrot no longer host the files for the updates, but they can be downloaded from the links below: It CANNOT be used to update the Parrot MKi9000, MKi9100 or MKI9200 โ€“ see the update
tnmn.
  • 1c4w3iwuzc.pages.dev/419
  • 1c4w3iwuzc.pages.dev/88
  • 1c4w3iwuzc.pages.dev/217
  • 1c4w3iwuzc.pages.dev/225
  • 1c4w3iwuzc.pages.dev/301
  • 1c4w3iwuzc.pages.dev/188
  • 1c4w3iwuzc.pages.dev/421
  • 1c4w3iwuzc.pages.dev/106
  • how to turn on parrot ck3100